What You Need to Know about Pressure Washing Vinyl Siding

You can pressure washing vinyl siding to remove grime and stains. Before you begin, mix some soap with water and apply it to the siding using a sponge or brush. Then, attach the hose to the bottom or top of your house, and aim the nozzle downwards. Then, let the solution work for about five to ten minutes to loosen stubborn dirt. This will allow the water to rinse off the siding easier.

You should clean your vinyl siding every two to three years, and in cooler climates, you may need to clean it even more often. However, it’s important not to overdo it or you’ll have to repaint or restrain it. Instead, choose a cleaning schedule that works for you.

A homemade pressure-washing solution can be made using household bleach. A gallon of bleach costs about $3.50 and will clean 2,000 square feet of vinyl siding. However, you should use a surfactant, which helps the cleaning solution adhere to the siding. A mild dishwashing soap such as Dawn will work well as a surfactant.

After preparing to pressure wash the siding, you must inspect it thoroughly. Be sure to check for loose and cracked pieces. If there are any cracks or overlaps, they may need further remediation. Also, you should seal any windows and electrical outlets to prevent water leaks. In addition, you should cover any plants around the house to prevent the detergent from damaging them.

If you’re planning on pressure washing vinyl siding yourself, start with low PSI and gradually work your way up. Remember to wear protective gear and wear a ladder when working on high surfaces. Otherwise, you might end up falling or injuring yourself. If you’re a beginner to pressure washing vinyl siding, you might want to hire a professional.

Before pressure washing vinyl siding, make sure the siding is in good condition. It’s best to check for loose seams and sealed caulking around windows before tackling the rest of the siding. Afterward, rinse the vinyl siding thoroughly before applying the paint. You can also water any plants to protect them from the chemicals in the cleaning solution. In addition to that, you should make sure that the siding is completely dry before attempting any other repairs.

If you don’t have a pressure washer, you can also try washing vinyl siding yourself with a garden hose sprayer or plain water. Just make sure to work in small batches and scrub the siding while it’s wet to loosen dirt and grime. Then move on to the next area.

A professional pressure washer can quickly clean your vinyl siding without causing damage. Although it’s the fastest way to clean vinyl siding, it’s still recommended that you hire a professional to do it for you. Using excessive pressure can damage the siding and even cause mold. In addition, it may even damage your windows.

In addition to cleaning dirt and debris from vinyl siding, it also protects the entire home from harmful bacteria. This helps maintain the original look of the vinyl siding and prevents rust on any metal surfaces, which can be very damaging. When done properly, pressure washing vinyl siding can be inexpensive and effective for your home. It also keeps your house looking great throughout the year.

Before you start pressure washing your vinyl siding, make sure you use a cleaning solution that contains bleach. Let the solution soak for a few minutes so it can loosen the stubborn dirt. Then, use a 25-degree nozzle and work in sweeping motions until the siding is thoroughly clean.